Selective extraction and separation of Fe, Mn oxides and organic materials in river surficial sediments

In order to investigate the adsorption mechanism of trace metals to surficial sediments （SSs）, a selective extraction procedure was improved in the present work. The selective extraction procedure has been proved to selectively remove and separate Fe, Mn oxides and organic materials （OMs） in the non-residual fraction from the SSs collected in Songhua River, China. After screening different kinds of conventional extractants of Fe and Mn oxides and OMs used for separation of heavy metals in the soils and sediments, NH2OH .HCl （0.1 mol/L） ＋ HNO3 （0.1 mol/L）, （NH4）2C2O4 （0.2 mol/L） ＋ H2C2O4 （pH 3.0）, and 30% of H2O2 were respectively applied to selectively extract Mn oxides, Fe/Mn oxides and OMs. After the extraction treatments, the target components were removed with extraction efficiencies between 86.09%--3.36% for the hydroxylamine hydrochloride treatment, 80.63%- 101.09% for the oxalate solution extraction, and 94.76%-102.83% for the hydrogen peroxide digestion, respectively. The results indicate that this selective extraction technology was effective for the extraction and separation ofFe, Mn oxides and OMs in the SSs, and important for further mechanism study of trace metal adsorption onto SSs.     

Concentrations of inorganic elements in 20 municipal waters in Sweden before and after treatment – links to human health

The water chemistry of 20 municipal water treatment plants in southern Sweden, representing various bedrock situations, and water qualities, were investigated. Four water samples, raw and treated, were collected from each plant and analyzed by predominantly ICP-OES and ICP-MS at four occasions from June to December, 2001. The concentrations of Ca, Mg, K, Na, HCO₃ and a number of micronutrients, varied considerably in treated waters from the studied plants (ranges; Ca: 9.1–53.7 mg L⁻¹, Mg: 1.4–10.9 mg L⁻¹, K: 1.1–4.8 mg L⁻¹, Na; 5.4–75.6 mg L⁻¹, HCO₃: 27–217 mg L⁻¹). The elimination of Fe and Mn from raw water was efficient in all treatments investigated, giving concentrations in treated waters below the detection limits at some plants. Softening filters gave waters with Ca-concentrations comparable to the softest waters in this study. Adjustment of pH by use of chemicals like lye, soda or lime, modified the consumer water composition significantly, besides raising the pH. It was estimated that drinking water contributed to approximately 2.2–13% of the daily Ca uptake, if the gastrointestinal uptake efficiency from food and water was estimated to be around 50%. The corresponding figures for Mg was 1.0–7% and for F 0–59%. None of the studied elements showed any significant time trends in raw or treated waters during the follow-up period. The concentrations of potentially toxic metals such as Al, Pb and U were low and did not indicate risks for adverse health effects (ranges; Al: 0.5–2.3 μg L⁻¹, Pb: 0–0.3 μg L⁻¹, U: 0.2.5 μg L⁻¹).     

Investigation of various physicochemical and environmental parameter influence on pesticide sorption to ditch bed substratum by means of experimental design

Diffuse pollution by pesticide applied in rural catchments may contribute to alter water quality. Besides actions relative to the way the substances are introduced into the environment, it is also possible to limit the contamination by interfering on their transfer pathways from fields to the main river network. Especially, interface areas such as buffer strips or small ditches may play a major part in pesticide diffuse pollution decrease. In ditches a great variety of materials may act as sorbents for organic contaminants: grass, leaves, wood debris or sediments. In this study, laboratory experiments were designed to determine sorption characteristics for three herbicides with different physicochemical properties on sediment and leaves in decay commonly found in agricultural ditches. Sorption capacities were assessed for the herbicides isoproturon, diuron and diflufenican.

Experimental design was carried out to investigate the effects of five parameters on herbicide sorption on sediment and dead leaves. These parameters have been chosen according to parallel field experiment needs. Thus, the influence of initial sorbent moisture, herbicide form, i.e. active substance or commercial formulation, water quality (tap or natural ditch water), bromide ions (used as conservative tracers) and solid/liquid ratio have been tested. Within the parameters investigated, pesticide formulation and solid/liquid ratio were the most important parameters affecting pesticide sorption on both ditch materials.     

危险品道路运输风险分级指数法研究

危险品道路运输过程风险影响因素多,随机性和不确定性大,定量风险评价比较复杂,至今没有统一的风险评估模型.为了有效预防危险品运输事故和进行快速风险评估,基于运输危险品本身特性和相关的风险影响因素探讨了运输危险品现实风险分级指数法.该方法由危险品风险分级指数、路线影响因素和安全措施补偿因子3部分构成.危险品风险分级指数由危险品加权平均风险等级和运输危险品量、泄漏点与居民区距离以及危险品扩散因子等级确定.危险品加权平均风险等级涉及其健康危害性、可燃性、化学反应活性以及特殊危险性(氧化性和与水反应性)等级的确定.路线影响因素包含运输道路特征、气象条件、交通状况和影响人员分布4类.安全措施补偿因子为车辆、设备、容器、包装因子,人员素质因子和安全管理因子3类.该方法可对运输危险品的潜在风险进行快速分级,有利于采取有效的安全预防和控制措施,降低运输事故概率和沿线影响人员风险.     

固体废弃物在新型墙体材料中的资源化利用

探讨了工业废弃物、农业废弃物和建筑废弃物在新型墙体材料中的各种资源化利用。将各种固体废弃物变废为宝,综合利用,能够减少对环境的污染,缓解资源紧张现象,是利国利民的好途径。     

基于主成分分析法的危险货物运输企业安全评价

为更准确地评估危险货物运输企业安全等级以降低其运输风险,提出基于主成分分析法(PCA)的危险货物运输企业BP神经网络安全评价模型;在从人-机-物-环境-管理角度构建危险货物运输企业安全评价指标的基础上,分别利用该模型和其他3种模型对3家实例企业进行仿真评价和对比分析。结果表明,该模型的评价结果与期望值间的相对误差约为0.5%～1.2%,计算精度优于其他模型,且具有计算量小等特点。     

重点流域水系沉积物中多环芳烃标准样品制备

环境标准样品是监测过程中重要的质量控制手段,中国受天然基体标准样品制备技术的制约,尚未拥有自己的沉积物中多环芳烃标准样品。为制备符合中国重点流域沉积物类型及多环芳烃浓度水平的沉积物标准样品,对中国6个重点流域的沉积物进行了采样,获得了制备多环芳烃标准样品的原料。分析常温及冷冻2种干燥方式对多环芳烃的影响,为制备大批量多环芳烃标准样品提供数据支持。对11个点位样品采用气相色谱质谱法测定16种优控多环芳烃化合物浓度,结果表明,样品均匀性良好,样品中多环芳烃检出率在99%以上,江河沉积物样品中多环芳烃浓度区间为664~2.91×103μg/kg,湖泊样品最高值达到1.25×105μg/kg,其主要污染源是化学燃料的燃烧。为中国制备水系沉积物中多环芳烃标准样品积累了技术基础。     

新制备生物炭的特性表征及其对石油烃污染土壤的吸附效果

生物炭作为一种绿色环保的功能材料因其在污水处理和污染土壤修复方面具有显著效果而受到极大关注.采用红外光谱、元素分析仪及微孔分析对不同温度(200、300、400、500和600℃)条件下制备的木屑和麦秆生物炭进行特性表征,并采用制备的生物炭净化石油污染土壤,分别考察了污染物性质、生物质原料和热解温度对其净化效果的影响.结果表明,随着热解温度的增高,生物炭芳香化程度增加,极性降低,微孔结构逐渐发育,表面积增大.加入生物炭33 d后,污染土壤中总石油烃及其组分烷烃的浓度比对照略有降低,而PAHs浓度下降显著.随着热解温度升高,2种生物炭对PAHs的吸附强度均逐渐增大,芳香度增高、表面积增大是强吸附的主要原因.2种生物炭在400℃及以下温度制备时对PAHs的吸附强度为:木屑生物炭＞麦秆生物炭;而400℃以上温度制备的生物炭吸附强度则相反,即麦秆生物炭＞木屑生物炭,说明生物炭原料对其吸附强度也具有显著影响.     

灾害救援中基于民众心理感知的应急物资多阶段分配问题研究

为有效解决在保证高效完成救援任务的同时考虑受灾民众行为，进而提高灾民对救援处置效果的满意度问题，结合行为运筹学相关理论和不公平厌恶理论，提出民众对于应急物资到达时间的风险感知度量模型，以及民众对于所得到的应急物资数量的公平满意度度量模型，构建基于灾民心理感知的应急物资多阶段调度模型，解决应急物资到达时间风险感知、物资分发数量公平满意度等多目标下的调配决策问题；设计基于蚁群优化思想的求解算法。研究结果表明:通过实例分析对比验证了模型在提升灾区民众对于应急物资分发策略满意度方面的有效性。     

添加炭基材料对蔬菜废物好氧堆肥进程和腐熟度的影响

以蔬菜废弃物辣椒秸秆和树叶为堆肥原料(CK),采用密闭式好氧堆肥工艺,研究了添加5%木本泥炭(T1)、5%活性炭(T2)和10%木本泥炭(T3)等炭基材料对堆肥p H、EC、CO2累积量、物料损失率、T值、C/N和发芽率指数的影响。结果显示,T2处理的p H在60 d后维持在8~9之间;EC值随着堆肥进行呈现先下降后升高再下降的趋势,最终CK、T1、T2和T3处理的EC值(m S/cm)分别降低了1.02、0.76、0.33和0.48;T2和T3处理的CO2累积量一直高于其他处理;所有处理的物料损失率均在20%以上;4个处理堆肥产品的T值分别为0.56、0.65、0.68和0.69;堆肥产品的发芽率指数分别为63.2%、69.3%、93.5%和86.1%。T值和发芽率指数显示T2和T3处理达到了腐熟阶段。结果表明,在蔬菜堆肥处理中添加炭基材料可改善堆肥产品的理化性质,加速堆肥物料的分解,有效地缩短堆肥周期和提高堆肥产品的腐熟度。